| PRO20 Snell SA2020 Top Air Helmets $269.95 |
 |
| RaceQuip PRO20 Top Air White |
|
|
 |
| RaceQuip Top Air Flat Black |
|
|
The RaceQuip PRO20 TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The shell is built using pre-preg composite materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield. The forced air keeps you cool and keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The SA rating means that the interior, paint and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 Top Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior helps keep your scalp cool. All these features are wrapped in a stylish aero design FRP composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 Top Air helmet. Available in Gloss White and Flat Black in sizes Small – 2XL
|
| MODEL |
COLOR |
YOUTH SIZE SFI 24.1 |
XX-SMALL |
X-SMALL |
SMALL |
MEDIUM |
LARGE |
X-LARGE |
2X-LARGE |
3X-LARGE |
|
|
| PRO20 TOP AIR |
GLOSS WHITE |
N/A |
N/A |
N/A |
266112 |
266113 |
266115 |
266116 |
266117 |
N/A |
| PRO20 TOP AIR |
FLAT BLACK |
N/A |
N/A |
N/A |
266992 |
266993 |
266995 |
266996 |
266997 |
N/A |
|
| SA2020 Helmet Size Chart |
| Helmet Size |
Inches |
Centimeters |
Hat Size |
| Youth* |
20 to 20 7/8 |
51 to 53 |
6 3/8 to 6 5/8 |
| XX-Small |
20 to 20 1/2 |
51 to 52 |
6 3/8 to 6 1/2 |
| X-Small |
20 7/8 to 21 1/4 |
53 to 54 |
6 5/8 to 6 3/4 |
| Small |
21 5/8 to 22 1/16 |
55 to 56 |
6 7/8 to 7 |
| Medium |
22 7/16 to 22 7/8 |
57 to 58 |
7 1/8 to 7 1/4 |
| Large |
23 1/4 to 23 5/8 |
59 to 60 |
7 3/8 to 7 1/2 |
| X-Large |
24 to 24 3/8 |
61 to 62 |
7 5/8 to 7 3/4 |
| 2X-Large |
24 13/16 to 25 3/16 |
63 to 64 |
7 7/8 to 8 |
| 3X-Large |
25 1/2+ |
65+ |
8 1/8+ |
*Youth SFI Helmets have a smaller, lighter shell and are designed for lower speed youth racing. Measure with a cloth tape around the head about 1" above eyebrows. A snug fit is optimum. Use size in CM for best accuracy and go with the largest measurement you get. Hat sizes are only a guideline and not the most accurate. Inches are rounded to nearest 1/16. If you are between sizes you must go with the larger size. Add 1 to 1.5cm for a head sock.
When fitting a helmet, be sure to tighten chin strap before evaluating fit. |
|
| PRO20 SA2020 Top Air Carbon Fiber $499.95 |
The RaceQuip PRO20 CARBON TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield though molded vents above the eyebrows. The forced air cools your face and airways and also keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber. The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 CARBON TOP AIR Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior helps keep your scalp cool. All these features are wrapped in a stylish aero design lightweight Carbon composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 CARBON Top Air helmet. Available in sizes Small – 2XL
|
| MODEL |
COLOR |
YOUTH SIZE SFI 24.1 |
XX-SMALL |
X-SMALL |
SMALL |
MEDIUM |
LARGE |
X-LARGE |
2X-LARGE |
3X-LARGE |
|
|
| PRO20 TOP AIR |
CARBON |
N/A |
N/A |
N/A |
92669029 |
92669039 |
92669059 |
92669069 |
92669079 |
N/A |
|
|
